Large capacity all-in-one hybrid inverter for commercial application, supporting up to 600kW system capacity.

Features

• All-in-one hybrid inverter
  Battery, load, grid, and solar connection are all supported.
• Programmable working mode
  Peak-shaving, back-up, use the system however you want it.
•  Scalable design
  Quadruple capacity by paralleling 4 units.
• Hot back-up One inverter fails in a parallel system, the other(s) takes over seamlessly.
• Touchscreen LCD
  More convenient for parameter setting and maintenance.
• Seamless transfer
  Uninterruptable power supply guaranteed.
• Dry contact output
  Supports remote control of DG.

MORE POWER

• Module power up to 670 W
• Module efficiency up to 21.6 %
• Up to 3.5 % lower LCOE
• Up to 5.7 % lower system cost
• Comprehensive LID / LeTID mitigation technology, up to 50% lower degradation
• Better shading tolerance

MORE RELIABLE

• 40 °C lower hot spot temperature, greatly reduce module failure rate
• Minimizes micro-crack impacts
• Heavy snow load up to 5400 Pa, wind load up to 2400 Pa*

ELECTRICAL DATA | STC

• Nominal Max. Power (Pmax): 665 W
• Opt. Operating Voltage (Vmp): 38.5 V
• Opt. Operating Current (Imp): 17.28 A
• Open Circuit Voltage (Voc): 45.6 V
• Short Circuit Current (Isc): 18.51 A
• Module Efficiency: 21.4%
• Operating Temperature: -40°C ~ +85°C
• Max. System Voltage: 1500V (IEC/UL) or 1000V (IEC/UL)
• Module Fire Performance: TYPE 1 (UL 61730 1500V) or TYPE 2 (UL 61730 1000V) or CLASS C (IEC 61730)
• Max. Series Fuse Rating: 35 A
• Application Classification: Class A
• Power Tolerance: 0 ~ + 10 W

MECHANICAL DATA

• Cell Type: Mono-crystalline
• Cell Arrangement: 132 [2 x (11 x 6) ]
• Dimensions: 2384 ˣ 1303 ˣ 35 mm (93.9 ˣ 51.3 ˣ 1.38 in)
• Weight: 37.9 kg (83.6 lbs)
• Front Cover: 3.2 mm tempered glass
• Frame: Anodized aluminium alloy, crossbar enhanced
• J-Box: IP68, 3 bypass diodes
• Cable: 4 mm2 (IEC), 10 AWG (UL)
• Cable Length (Including Connector): 460 mm (18.1 in) (+) / 340 mm (13.4 in) (-) (supply additional jumper cable: 2 lines / Pallet) or customized length*
• Connector: T4 series or MC4-EVO2
• Per Pallet: 31 pieces
• Per Container (40′ HQ): 527 pieces

DEYE 18 kW Single Phase 3 MPPT Hybrid Inverter – SUN-12/14/16/18K-SG01LP1-EU-AM3-P
Single Phase Hybrid Inverter | 12-18 kW | 3 MPPT | LV Battery Supported

CU 202 is designed for monitoring and controlling SQFlex submersible pumps in solar applications.

The simple user interface and built-in Bluetooth module ensure easy installation and configuration. The Bluetooth connection to the Grundfos GO app offers extensive setup and monitoring options.

CU 202 is pre-configured for tank filling, the most used application, offering a plug-and-pump solution, which saves time on commissioning. For other applications, the controller provides several control modes, which can be easily selected and set through the Grundfos GO app. Grundfos GO makes the configuration easier and allows installers to set up high-performing systems.

CU 202 communicates with the pump through the power cable. This communication principle is called mains borne signaling or powerline communication and means that no additional cables are required to the pump.

Grundfos GO offers detailed information and logs that help the installer to find the root cause in failure situations. In addition, the controller can use Wi-Fi, GENIbus, or Modbus to monitor the system remotely either through Grundfos Connect or another SCADA system. Remote monitoring saves time when inspecting installations.

CU 202 is equipped with power and pump connections and offers 2 configurable inputs and outputs. Additionally, a backup battery can be added to the controller to maintain communication and measurements when solar power is insufficient.

The display of the controller shows:

The pump can be turned on and off through the display of the controller. The controller can display a read-out of the application-related data. It is also possible to adjust the setpoint. The LEDs on the display of the controller can be set to sleep mode, for example, to avoid attracting wildlife.

The following logs are available through Grundfos GO or remote monitoring:

CU 202 indicates warnings and alarms on the display of the controller. Additionally, the Grundfos GO app provides further information on these events including the recommended solutions.