Back to Products

Outback Power VFXR3024E 3000W, 24V Inverter/Charger

(0)

₦3,516,000.00

  • Modular, stackable: up to nine units can be combined for three-phase operation and ten in parallel, single phase operation.
  • Seven different programmable operating modes, with generator assist.
  • GridZero operating mode minimizes grid dependence in areas where incentives are changing and utility sell back is limited.
  • Sinewave output in 12V, 24V or 48V versions with a typical operating efficiency up to 93%.

Quantity:

Free Delivery

Nationwide shipping

Warranty

Manufacturer guarantee

Expert Support

Installation & maintenance

  • Description
  • Features
  • Specifications
  • Reviews

Description

The latest, most advanced features on the industry’s most trusted and proven platform—that’s the essence of OutBack’s new FXR Series of Grid/Hybrid inverter/chargers. Capable of off-grid or grid-connected operation in a single model, the FXR Grid/Hybrid inverter/chargers provide system designers with unprecedented flexibility and compatibility for nearly any power conversion scenario.

The new FXR features and technologies on the acclaimed FX platform include:

  • Both off-grid and grid-tied functionality in one unit
  • Seven programmable modes, including GridZero and Support Mode and built-in networked communications
  • Advanced Battery Charging (ABC) with expanded charging voltages and time parameters, enabling system designers to accommodate the specific charging profiles and algorithms of new and emerging energy storage technologies including Lithium Ion, Aqueous Ion and Flow chemistry batteries
  • Easy system upgradability in the field

FXR inverter/chargers can be paired with a MATE3s remote to add OPTICS RE to remotely monitor and control system performance from any location. Available in power ranges from 2000W-3600W, multiple units may be stacked and connected with other OutBack Power electronics for more seamless system integration and the ability to function in a wide variety of applications, and system sizes. Up to nine inverters can be combined in a 3-phase system with the 12V, 24V or 48V models, and up to 36kW in a grid-tied 24V or 48V system. The exclusive modular system architecture means that increased power output is just an additional FXR inverter/charger away.

Available in sealed or vented units with NEMA type 1 die-cast aluminum chassis designed to operate in the harshest environmental conditions such as high temperatures, humidity or corrosive salt air, the FXR’s continue in OutBack’s tradition of absolute dependability in mission critical installations no matter how harsh or challenging the conditions.

Features:

  • Dimensions (LxWxH): 16.25 × 8.25 × 12 inches
  • Weight: 28 kg
  • Single-phase, 230V Sinewave Output
  • Programmable for Seven Different Modes with Generator Assist
  • Modular, Stackable Design for up to Nine Inverters in Three-phase and 10 Inverters in Grid-tied
  • Up to 93% Operating Efficiency
  • Field Upgradable Software
  • Standard 5-Year Warranty with Optional 10-Year Upgrade

Key Features

No features available for this product.

Technical Specifications

No specifications available for this product.

Customer Reviews

Reviews

There are no reviews yet.

Be the first to review “Outback Power VFXR3024E 3000W, 24V Inverter/Charger”

Your email address will not be published. Required fields are marked *

Please log in to write a review. You must purchase this product to leave a review.

AI-Powered Recommendations

Customers who viewed this item also loved these

DEYE 5 kW Single Phase 2 MPPT Hybrid Inverter
Sale
Add to Cart
(0)

DEYE 5 kW Single Phase 2 MPPT Hybrid Inverter

DEYE 5 kW Single Phase 2 MPPT Hybrid Inverter
Colorful touch LCD, IP65 protection degree
AC couple to retrofit existing solar system
Max. 16 pcs parallel for on-grid and off-grid
operation; Support multiple batteries parallel
Max. charging/discharging current of 190A
6 time periods for battery charging/discharging
Support storing energy from diesel generator

₦1,795,000
LONGi Hi-MOx6 640W Solar Panel
Add to Cart
(0)

LONGi Hi-MOx6 640W Solar Panel

₦192,000
Victron Energy SmartSolar MPPT RS 450/100-Tr Solar Charge Controller
Victron Energy
Add to Cart
(0)

Victron Energy SmartSolar MPPT RS 450/100-Tr Solar Charge Controller

The SmartSolar MPPT RS solar charge controllers are Victron’s solution for systems with large series-connected PV arrays charging 48 V DC battery banks. This product is perfect for large off-grid, and grid-connected battery systems.

Available in a 5.76kW and 11.52kW model, features include a wide 80-450 VDC operating solar voltage input, independent tracking inputs, full connectivity, isolated PV connections, display screen, and fully programmable battery charging parameters and active cooling. The new metal case design and fully covered electrical connections improve the safety and modernize the presentation in line with the latest suite of Victron products.

MPPT: Ultra Fast Maximum Power Point Tracking

The SmartSolar RS solar charge controller connects to a PV array of between 80 and 450 Volt Voc and will efficiently charge your 48V battery bank with either 100A or 200A.

The charge settings are fully programmable and can be set up for different battery chemistries, like lead-acid, lithium, and more.

Setup and monitor with VictronConnect

The SmartSolar RS charge controller can be remotely controlled and configured over Bluetooth via the VictronConnect App. This allows device set-up, management, and at-a-glance information, such as battery voltage and current, PV voltage and current, historical data and trends.

Daisy Chain Additional Units

The SmartSolar RS charge controller is equipped with VE.Can bus ports. This allows for communication with additional SmartSolar RS & VE.Can MPPT units. The additional units are simply “daisy-chained” to each other with an RJ45 cable.

When connected to each other, all individual charge controllers will synchronize their charge stages. They can also send their data, via the same cable, for monitoring to a GX device (such as the Cerbo GX).

Remote Monitoring and Control

If the GX device is connected to the internet, the Victron Remote Management Portal (VRM) provides access to the full power of your SmartSolar RS charge controllers.

If your installation is connected to a GX device and the internet, Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; for free.

For remote installations – even when there is no internet connection nearby – you may be able to monitor your MPPT by connecting the  GlobalLink 520.

SmartSolar Display

The SmartSolar RS charge controller is equipped with a display on the front panel. The display reads battery volts, charge current and voltages from both array’s individually including instantaneous and total figures and unit status including any possible error codes.

I/O Connections

The SmartSolar RS charge controller is equipped with a programmable relay and options for remote temperature and voltage sensing. The remote input can accept the Victron smallBMS and other types of BMS with allow-to-charge signals.

₦1,926,822
WECO 1M2 1.2 MWh/500 kW ESS All-in-One Container
WECO Battery WECO ESS
Add to Cart
(0)

WECO 1M2 1.2 MWh/500 kW ESS All-in-One Container

WECO 1M2 1.2 MWh/500 kW
Efficient. Compact. Reliable.

Unlock the future of sustainability, designed to efficiently harness, store, and distribute renewable energy for a cleaner tomorrow!

FEATURES

  • High Voltage
  • Cabinet Paralleling Via EMS
  • Up To 20 Years Operations
  • Remote Monitoring
  • App & Web Portal Assistance

Advanced Energy Storage Solution for Diverse Applications

Discover the WECO 1M2 1.2 MWh/500 kW Energy Storage All-in-One Container—a cutting-edge solution designed to address the growing demand for efficient and robust energy storage. This all-in-one system combines high performance and reliability, making it ideal for a wide range of applications, including commercial, industrial, and renewable energy projects. Engineered with precision and innovation, the WECO 1M2 enables seamless integration, ensuring optimized energy consumption and enhanced sustainability.

Superior Features for Exceptional Performance

Equipped with a 1.2 MWh capacity and 500 kW output, the WECO 1M2 sets a new standard in energy storage technology. The modular containerized design offers straightforward installation and scalability, allowing you to adapt to your energy needs effortlessly. Its advanced battery management system ensures real-time monitoring, protecting the unit against potential disruptions while maximizing efficiency. With a robust and durable construction, the container is designed to withstand harsh environments, making it a reliable choice for both indoor and outdoor setups.

Streamlined System, Ready for Immediate Deployment

The WECO 1M2 is meticulously crafted to provide an all-in-one solution. This complete container system includes pre-installed batteries, an inverter, and auxiliary systems, eliminating the complexity of separate component integration. Whether you’re powering remote facilities or managing peak electricity loads, this plug-and-play container simplifies energy storage deployment while reducing operational costs. Experience the convenience of a fully assembled, tested solution that gets your energy goals up and running in no time.

Upgrade your energy management capabilities with the WECO 1M2 1.2 MWh/500 kW ESS All-in-One Container. Offering unparalleled performance and ease of use, this comprehensive energy storage system is an investment in sustainability and energy independence. Explore how this innovative container can revolutionize your energy storage solutions today.

₦0