• Panels and system monitoring

The Color Control GX is the communication center of your installation. It offers at-a-glance live information and lets you control all products connected to it. Full system control is gained – almost anywhere in the world – by accessing your Color Control GX using our free-to-use Victron Remote Management Portal (VRM).

• Intuitive system overview – all you need to know

With a single touch, Color Control GX provides an instant overview of your system: battery state of charge; present power consumption; power harvest from PV; power provision from mains/generator.

• The full power of Victron Remote Management

Victron Remote Management (VRM) provides you with full access to the very extensive controls and settings of all system components which are connected to either your CCGX or Venus GX. It allows the remote user and installer to log in from anywhere, at any time. This powerful application also provides for hassle-free diagnostic checks and analysis of archived information.

• Automatic Generator start/stop

The Color Control GX can be programmed to auto-start your generator – triggered by low-voltage; high-demand; or battery state of charge. It can be further tailored to delay ignition until the end of ‘quiet’ periods – avoiding accidental nuisance at dead of night.

• Remote Console – control everything from anywhere…

A Remote Console feature is available. It’s like carrying the front face of your CCGX control panel around on your phone, or other device.

• Energy Storage Systems – 24 hour Monitoring

The Color Control GX manages Energy Storage Systems. It keeps back-up batteries at 100% ; kicks-in during power-cuts; and diverts excess (solar) power to self-consumption – saving you money. For examples and more detailed information see the ESS (Energy Storage System) manual.

• Remotely monitor your boat or motorhome electrics

Planning a trip? Remote monitoring of your Color Control GX allows you to make sure your boat or motor home are ready to go. Color Control GX also allows you to talk to connected equipment from other manufacturers.

Protect your system from lightning strikes with the Midnite Solar Surge Protective Device (SPD). Designed for both AC and DC solar electric systems, it provides protection to service panels, load centers, or where the surge protector is directly connected.

Designed for both indoor and outdoor use, the SPD is offered in three different voltages—115, 300 and 600 volts. Protection is achieved by reducing the clamping voltage to a safe level that your system can sustain and that won’t damage electronic components.

This Midnite Solar surge suppressor is a welcome replacement to arrestors that have been used in the past. Providing eight times the protection as previous arrestors, it is much better at clamping surges to a safe voltage.

Features & Attributes:

• Dimensions (LxWxH): 4.4 × 3.8 × 3.5 inches
• Weight: 0.4 kg
• Much safer than previous surge suppressors
• Engineered for both AC and DC electric systems
• ETL listed
• Type 1 Device
• MPN: MNSPD-300-AC

• Solar charge controller

The MPPT VE.Can SmartSolar charger uses the latest and fastest technology to convert energy from a solar array into energy that optimally charges a battery bank.

The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged.

• MPPT: Ultra Fast Maximum Power Point Tracking

The MPPT VE.Can SmartSolar charger connects to a PV array of 150 or 250 Volt Voc and will automatically detect and charge your 12, 24, or 48V battery bank with current ranging from 70 to 100A depending on the model.

The charge settings are fully programmable and can even be set up for different battery chemistries, like lead-acid, lithium and others.

• Control Your Charger Remotely

The MPPT VE.Can SmartSolar charger can be remotely controlled and configured over Bluetooth via the VictronConnect App. This allows device set-up, management, and at-a-glance information, such as battery voltage and current, PV voltage and current, and historical data.

• Daisy Chain Additional Units

The VE.Can SmartSolar charger is equipped with CAN bus ports. This allows for communication with additional VE.Can SmartSolar chargers. The additional units are simply “daisy-chained” to each other with a single RJ45 cable between the individual units.

When connected to each other, all individual VE.Can SmartSolar chargers, will synchronize their charge stages. They can also send their data, via a single cable, to a GX monitoring device.

• Remote Monitoring and Control

If the GX device is connected to the internet, the Victron Remote Management Portal (VRM) provides access to the full power of your solar charger(s).

For remote installations – even when there is no internet connection nearby – you may be able to monitor your MPPT by connecting the  GlobalLink 520.

• SmartSolar Control Display

The VE.Can SmartSolar charger is also equipped with a VE.Direct port like our other MPPT solar chargers. This port can be for single unit monitoring or for streetlight control. The remote on/off connector can be externally controlled by a third-party device like a lithium battery. An optional plug-in LCD display/control provides live-data, set-up and management, straight from the face of the device.

DEYE 10.24 kWh SE-G10.2 Lithium Iron Phosphate Battery—Powerful Energy Storage Capacity

The DEYE SE-G10.2 Lithium Iron Phosphate Battery redefines energy storage with its remarkable capacity of 200 Ah and 10.24 kWh of energy storage. Tailored to meet the demands of both residential and commercial applications, this battery ensures that you always have sufficient energy to power your needs. With its high capacity, it is ideal for reducing dependency on grid power and maximizing energy efficiency in an eco-friendly manner.

Safety and Reliability at Its Core

Safety is paramount, and the DEYE SE-G10.2 delivers with its advanced lithium iron phosphate (LFP) chemistry, crafted without cobalt for a safer and more reliable energy solution. Its wide operating range enables dependable performance under extreme temperatures, functioning flawlessly between -20°C and 55°C. Whether you’re in blistering heat or freezing cold, this battery is built to last.

Modular Design for Scalability

Experience the freedom to customize your energy storage setup with the battery’s modular design. Expandable up to 64 units in parallel, the DEYE SE-G10.2 provides an incredibly scalable energy solution, perfect for users who anticipate growth in energy consumption. Whether it’s a small-scale installation or a sprawling energy setup, this product adapts to your evolving requirements.

User-Friendly Features for Seamless Integration

Make energy management easy and hassle-free with advanced user-centric features. The automatic networking function simplifies the initial setup, while remote monitoring keeps you informed on the battery’s performance anytime, anywhere. Regular firmware updates ensure you stay ahead of the curve with cutting-edge advancements.

Eco-Friendly and Space-Saving Design

Crafted with environmental stewardship in mind, the DEYE SE-G10.2 utilizes non-toxic, pollution-free materials, supporting sustainable energy practices. In addition, the battery’s versatile mounting options—rack, wall, or stacked installations—make it a space-efficient choice, accommodating even limited installation areas.

Durability and Robust Communication

Built to endure, this battery boasts an impressive cycle life of over 6,000 cycles under optimal conditions, offering exceptional durability. Equipped with sophisticated CAN 2.0 and RS485 communication ports, it facilitates seamless connectivity, enabling integration with a wide range of energy systems and devices for optimal performance.

The DEYE SE-G10.2 Lithium Iron Phosphate Battery is a high-performance, safe, and scalable energy solution, perfectly engineered for modern energy needs. Whether you seek efficiency, reliability, or sustainability, this battery delivers on all fronts.